Linux上PPTP VPN的一键安装以及设置开机启动的方法

设置pptp vpn 开机启动

有的人懒的重启后手动开启服务，所以下面我再补上开机自动启动pptp vpn 和 iptables的命令

代码如下:

#chkconfig pptpd on //开机启动pptp vpn服务

#chkconfig iptables on //开机启动iptables

贴个openvz的pptp vpn 一件安装包吧：centos，fedora，redhat 6.x 使用的脚本(vps上从没安装过的可以试试这个脚本): 点击下载

代码如下:

#!/bin/bash

# Interactive pptp vpn install script for an OpenVZ VPS

# surport : Cenost ,Fedora 6.x

# Augest 24, 2014 v1.00

#url ： http://www.dabu.info/?p=2178

echo "######################################################"

echo "Interactive PoPToP Install Script for an OpenVZ VPS"

echo

echo "Make sure to contact your provider and have them enable"

echo "IPtables and ppp modules prior to setting up PoPToP."

echo "PPP can also be enabled from SolusVM."

echo

echo "You need to set up the server before creating more users."

echo "A separate user is required per connection or machine."

echo "######################################################"

echo

echo "######################################################"

echo "Select on option:"

echo "1) Set up new PoPToP server AND create one user"

echo "2) Create additional users"

echo "######################################################"

read x

if test $x -eq 1; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

## get the VPS IP

#ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

echo

echo "######################################################"

echo "Downloading and Installing ppp and pptpd "

echo "######################################################"

[Ok3w_NextPage]

yum install ppp -y

rpm -Uvh http://poptop.sourceforge.net/yum/stable/rhel6/pptp-release-current.noarch.rpm

yum install pptpd -y

echo

echo "######################################################"

echo "Creating Server Config"

echo "######################################################"

cp /etc/ppp/options.pptpd /etc/ppp/options.pptpd.bak

sed -i '70a ms-dns 8.8.8.8' /etc/ppp/options.pptpd

# setting up pptpd.conf

sed -i '101a localip 192.168.9.1' /etc/pptpd.conf

sed -i '102a remoteip 192.168.9.11-30' /etc/pptpd.conf

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Forwarding IPv4 and Enabling it on boot"

echo "######################################################"

cat >> /etc/sysctl.conf <

net.ipv4.ip_forward=1

END

sysctl -p

echo

echo "######################################################"

echo "Updating IPtables Routing and Enabling it on boot"

echo "######################################################"

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

# saves iptables routing rules and enables them on-boot

iptables-save > /etc/iptables.conf

cat > /etc/network/if-pre-up.d/iptables <

#!/bin/sh

iptables-restore < /etc/iptables.conf

END

chmod +x /etc/network/if-pre-up.d/iptables

cat >> /etc/ppp/ip-up <

ifconfig ppp0 mtu 1400

END

echo

echo "######################################################"

echo "Restarting PoPToP"

echo "######################################################"

sleep 5

/etc/init.d/pptpd restart

echo

echo "######################################################"

[Ok3w_NextPage]

echo "Server setup complete!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

# runs this if option 2 is selected

elif test $x -eq 2; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Addtional user added!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

else

echo "Invalid selection, quitting."

exit

#!/bin/bash

# Interactive pptp vpn install script for an OpenVZ VPS

# surport : Cenost ,Fedora 6.x

# Augest 24, 2014 v1.00

#url ： http://www.dabu.info/?p=2178

echo "######################################################"

echo "Interactive PoPToP Install Script for an OpenVZ VPS"

echo

echo "Make sure to contact your provider and have them enable"

echo "IPtables and ppp modules prior to setting up PoPToP."

echo "PPP can also be enabled from SolusVM."

echo

echo "You need to set up the server before creating more users."

echo "A separate user is required per connection or machine."

echo "######################################################"

echo

echo "######################################################"

echo "Select on option:"

echo "1) Set up new PoPToP server AND create one user"

[Ok3w_NextPage]

echo "2) Create additional users"

echo "######################################################"

read x

if test $x -eq 1; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

## get the VPS IP

#ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

echo

echo "######################################################"

echo "Downloading and Installing ppp and pptpd "

echo "######################################################"

yum install ppp -y

rpm -Uvh http://poptop.sourceforge.net/yum/stable/rhel6/pptp-release-current.noarch.rpm

yum install pptpd -y

echo

echo "######################################################"

echo "Creating Server Config"

echo "######################################################"

cp /etc/ppp/options.pptpd /etc/ppp/options.pptpd.bak

sed -i '70a ms-dns 8.8.8.8' /etc/ppp/options.pptpd

# setting up pptpd.conf

sed -i '101a localip 192.168.9.1' /etc/pptpd.conf

sed -i '102a remoteip 192.168.9.11-30' /etc/pptpd.conf

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Forwarding IPv4 and Enabling it on boot"

echo "######################################################"

cat >> /etc/sysctl.conf <

net.ipv4.ip_forward=1

END

sysctl -p

echo

echo "######################################################"

echo "Updating IPtables Routing and Enabling it on boot"

echo "######################################################"

[Ok3w_NextPage]

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

# saves iptables routing rules and enables them on-boot

iptables-save > /etc/iptables.conf

cat > /etc/network/if-pre-up.d/iptables <

#!/bin/sh

iptables-restore < /etc/iptables.conf

END

chmod +x /etc/network/if-pre-up.d/iptables

cat >> /etc/ppp/ip-up <

ifconfig ppp0 mtu 1400

END

echo

echo "######################################################"

echo "Restarting PoPToP"

echo "######################################################"

sleep 5

/etc/init.d/pptpd restart

echo

echo "######################################################"

echo "Server setup complete!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

# runs this if option 2 is selected

elif test $x -eq 2; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Addtional user added!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

else

echo "Invalid selection, quitting."

exit

复制下面代码到install.sh中，然后 sh isntall.sh。这个是只支持debian和ubuntu系列，centos不支持。

代码如下:

#!/bin/bash

# Interactive PoPToP install script for an OpenVZ VPS

# Tested on Debian 5, 6, and Ubuntu 11.04

# April 2, 2013 v1.11

# http://www.putdispenserhere.com/pptp-debian-ubuntu-openvz-setup-script/

[Ok3w_NextPage]

echo "######################################################"

echo "Interactive PoPToP Install Script for an OpenVZ VPS"

echo

echo "Make sure to contact your provider and have them enable"

echo "IPtables and ppp modules prior to setting up PoPToP."

echo "PPP can also be enabled from SolusVM."

echo

echo "You need to set up the server before creating more users."

echo "A separate user is required per connection or machine."

echo "######################################################"

echo

echo "######################################################"

echo "Select on option:"

echo "1) Set up new PoPToP server AND create one user"

echo "2) Create additional users"

echo "######################################################"

read x

if test $x -eq 1; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

# get the VPS IP

ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

echo

echo "######################################################"

echo "Downloading and Installing PoPToP"

echo "######################################################"

apt-get update

apt-get -y install pptpd

echo

echo "######################################################"

echo "Creating Server Config"

echo "######################################################"

cat > /etc/ppp/pptpd-options <

name pptpd

refuse-pap

refuse-chap

refuse-mschap

require-mschap-v2

require-mppe-128

ms-dns 8.8.8.8

ms-dns 8.8.4.4

proxyarp

nodefaultroute

lock

nobsdcomp

[Ok3w_NextPage]

END

# setting up pptpd.conf

echo "option /etc/ppp/pptpd-options" > /etc/pptpd.conf

echo "logwtmp" >> /etc/pptpd.conf

echo "localip $ip" >> /etc/pptpd.conf

echo "remoteip 10.1.0.1-100" >> /etc/pptpd.conf

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Forwarding IPv4 and Enabling it on boot"

echo "######################################################"

cat >> /etc/sysctl.conf <

net.ipv4.ip_forward=1

END

sysctl -p

echo

echo "######################################################"

echo "Updating IPtables Routing and Enabling it on boot"

echo "######################################################"

iptables -t nat -A POSTROUTING -j SNAT --to $ip

# saves iptables routing rules and enables them on-boot

iptables-save > /etc/iptables.conf

cat > /etc/network/if-pre-up.d/iptables <

#!/bin/sh

iptables-restore < /etc/iptables.conf

END

chmod +x /etc/network/if-pre-up.d/iptables

cat >> /etc/ppp/ip-up <

ifconfig ppp0 mtu 1400

END

echo

echo "######################################################"

echo "Restarting PoPToP"

echo "######################################################"

sleep 5

/etc/init.d/pptpd restart

echo

echo "######################################################"

echo "Server setup complete!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

# runs this if option 2 is selected

elif test $x -eq 2; then

echo "Enter username that you want to create (eg. client1 or john):"

[Ok3w_NextPage]

read u

echo "Specify password that you want the server to use:"

read p

# get the VPS IP

ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Addtional user added!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

else

echo "Invalid selection, quitting."

exit

#!/bin/bash

# Interactive PoPToP install script for an OpenVZ VPS

# Tested on Debian 5, 6, and Ubuntu 11.04

# April 2, 2013 v1.11

# http://www.putdispenserhere.com/pptp-debian-ubuntu-openvz-setup-script/

echo "######################################################"

echo "Interactive PoPToP Install Script for an OpenVZ VPS"

echo

echo "Make sure to contact your provider and have them enable"

echo "IPtables and ppp modules prior to setting up PoPToP."

echo "PPP can also be enabled from SolusVM."

echo

echo "You need to set up the server before creating more users."

echo "A separate user is required per connection or machine."

echo "######################################################"

echo

echo "######################################################"

echo "Select on option:"

echo "1) Set up new PoPToP server AND create one user"

echo "2) Create additional users"

echo "######################################################"

read x

if test $x -eq 1; then

echo "Enter username that you want to create (eg. client1 or john):"

[Ok3w_NextPage]

read u

echo "Specify password that you want the server to use:"

read p

# get the VPS IP

ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

echo

echo "######################################################"

echo "Downloading and Installing PoPToP"

echo "######################################################"

apt-get update

apt-get -y install pptpd

echo

echo "######################################################"

echo "Creating Server Config"

echo "######################################################"

cat > /etc/ppp/pptpd-options <

name pptpd

refuse-pap

refuse-chap

refuse-mschap

require-mschap-v2

require-mppe-128

ms-dns 8.8.8.8

ms-dns 8.8.4.4

proxyarp

nodefaultroute

lock

nobsdcomp

END

# setting up pptpd.conf

echo "option /etc/ppp/pptpd-options" > /etc/pptpd.conf

echo "logwtmp" >> /etc/pptpd.conf

echo "localip $ip" >> /etc/pptpd.conf

echo "remoteip 10.1.0.1-100" >> /etc/pptpd.conf

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Forwarding IPv4 and Enabling it on boot"

echo "######################################################"

cat >> /etc/sysctl.conf <

net.ipv4.ip_forward=1

END

sysctl -p

echo

echo "######################################################"

echo "Updating IPtables Routing and Enabling it on boot"

echo "######################################################"

iptables -t nat -A POSTROUTING -j SNAT --to $ip

# saves iptables routing rules and enables them on-boot

iptables-save > /etc/iptables.conf

cat > /etc/network/if-pre-up.d/iptables <

[Ok3w_NextPage]

#!/bin/sh

iptables-restore < /etc/iptables.conf

END

chmod +x /etc/network/if-pre-up.d/iptables

cat >> /etc/ppp/ip-up <

ifconfig ppp0 mtu 1400

END

echo

echo "######################################################"

echo "Restarting PoPToP"

echo "######################################################"

sleep 5

/etc/init.d/pptpd restart

echo

echo "######################################################"

echo "Server setup complete!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

# runs this if option 2 is selected

elif test $x -eq 2; then

echo "Enter username that you want to create (eg. client1 or john):"

read u

echo "Specify password that you want the server to use:"

read p

# get the VPS IP

ip=`ifconfig venet0:0 | grep 'inet addr' | awk {'print $2'} | sed s/.*://`

# adding new user

echo "$u * $p *" >> /etc/ppp/chap-secrets

echo

echo "######################################################"

echo "Addtional user added!"

echo "Connect to your VPS at $ip with these credentials:"

echo "Username:$u ##### Password: $p"

echo "######################################################"

else

echo "Invalid selection, quitting."

exit

tech首页更多tech